Type SHD-GC 5000 Volts

Flexible tinned copper conductors, Semi-conducting insulation shield layer under tinned copper and color-coded nylon braid. Semi-conducting strand shield layer. Flexible tinned copper ground check** conductor with yellow insulation. 90 C Ethylene-Propylene Rubber (EPR) insulation. Flexible tinned copper ground wires. Taped core assembly and  Reinforced mold-cured chlorinated polyethylene (CPE) jacket.

Packaging: Long length reels, cut to length.

Ratings & Approvals

ICEA S-75-381/NEMA WC-58

ASTM B-172

ASTM B-33

Applications:
PCS
Catalogue
Number 		Power Conductor Ground Conductor AMPS* Jacket
(inches) 		Nominal
O.D.
(inches) 		Total
Weight
(lbs/km)
No. AWG
Size 		Stranding Insulation
(inches) 		AWG
Size 		Strands
SHD06-03-5KV 3 6 133 .110 10 49 93 .185 1.560 5,118
SHD04-03-5KV 3 4 259 .110 8 133 122 .205 1.680 6,299
SHD02-03-5KV 3 2 259 .110 6 133 159 .205 1.870 8,202
SHD01-03-5KV 3 1 259 .110 5 133 184 .220 1.950 9,384
SHD001-03-5KV 3 1/0 266 .110 4 259 211 .220 2.080 11,123
SHD002-03-5KV 3 2/0 342 .110 3 259 243 .235 2.200 12,566
SHD004-03-5KV 3 4/0 532 .110 1 259 321 .250 2.500 17,389
SHD250-03-5KV 3 250 627 .120 1/0 266 355 .250 2.690 21,162
SHD350-03-5KV 3 350 888 .120 2/0 342 435 .265 2.950 25,854
SHD500-03-5KV 3 500 1221 .120 4/0 532 536 .280 3.310 34,254

 

*Ampacity based on 90°C continuous conductor temperature in 40°C ambient air.

 

* Alternate strand constructions for power conductors:
1/0 AWG through 4/0 AWG 259 strand 37x7.
250 Kcmil through 500 Kcmil 427 wire 61x7
** Ground Check - 8 AWG (minimum 133 strand 7x19) ground check conductor on 4 AWG through 4/0 AWG cable.
6 AWG (minimum 133 strand 7x19) ground check conductor on 250 kcmil and larger cable.
** CPE or chlorosulfonated polyethylene (Hypalon) jackets. Black CPE is standard. Coloured CPE and Black Hypalon jackets available upon request.
Tolerances :
+8%/-5% of nominal outside diameter

 

Applications:

For heavy duty medium voltage power applications on heavy mobile mining equipment, where delivery of a heavy power is required, such as shovels, dredgers, drilling rigs, other off-track equipment, and for power feeders in underground mines in circuits not exceeding the rated voltage. The cable is designed to operate continuously at a conductor temperature of 90°C maximum. The SHD-GC cable is for applications on three phases AC circuit, where grounding conductor and ground check control cable are required.